This website is privately owned and is not affiliated with any government agency.

Road Test offices in Hampton, South Carolina

Road Test offices in Hampton, South Carolina



Road Test offices in South Carolina

DMV Office (Hampton)

115 Cemetary Road, 29944

(803) 943-3482



Office details

DMV Office (Allendale)

3657 Allendale Fairfax Road, 29827

(803) 584-2694



Office details

DMV Office

102 Mable T. Willis Blvd., 29488

(843) 538-7248



Office details

DMV Office

407 Live Oak Drive, 29936

(843) 726-6934



Office details

DMV Office

1270 Main St., 29812

(803) 259-3335



Office details

DMV Office

341 Lacey St., 29003

(803) 245-0837



Office details

St. George DMV Office

5315 E. Jim Bilton Blvd., 29477

(843) 563-6130



Office details

DMV Office

28 Munch Drive, 29906

(843) 379-8822



Office details

DMV Office

1720 Charleston Highway, 29115

(803) 531-6866



Office details

DMV Office

15 Sheridan Park, 29910

(843) 815-6981



Office details

DMV Office

1755 Richland Ave East, 29801

(803) 641-7752



Office details

DMV Office

415 Chestnut St., 29135

(803) 874-1950



Office details

DMV Office

135 Wimberly Drive, 29456

(843) 572-7854



Office details

DMV Office

3790 Leeds Ave., 29405

(843) 740-6168



Office details

DMV Office

1711 Ascauga Lake Road, 29841

(803) 279-6659



Office details


Other services in Hampton county, South Carolina:


Search Road Test offices in Hampton (SC) by city


Search Road Test offices in South Carolina by county


Search Road Test offices by state



Some tips for your drivers license test in Hampton:

If you go to take your driver's test chances are that, if your a car Enthusiast, this is one of the most exciting days of your life and even if you're not it opens up a world of possibilities for traveling and do things you never could have done before. If you follow these few simple tips you'll be well on your way and you'll pass it with flying colors.

About mirrors

Before leaving the parking lot and getting out on the road is important to check out your mirrors, adjust your seat position, adjust the steering wheel position and of course fasten your seatbelt.

Proper 9 and 3 hand position

Proper hand position is at 9 and 3, and i guarantee if you drive one-handed at the 12 position you're going to fail your test. It's important to keep both hands on the steering wheel at all times. Of course if you have a manual transmission vehicle you have to take one hand off the ship, but this will keep your test administrator feeling safe and you will be in the most control of your vehicle.

When changing lanes

When changing lanes is important to do the following: First Signal, then look in your rearview mirror all by your side mirror, look over your shoulder, and if is safe, then you can go. Once you're in the lane that you're moving into all the way, then you can turn your turn indicator. Always signal if you're changing lanes no matter if there's no traffic around you, for the driver's test it is important to check both mirrors, look over your shoulder and use your turn signal.

Multiple lanes changing

If you're going over multiple Lanes always go from one lane to the next, pause for a little bit of time, then turn your turning indicator on, look at both mirrors over shoulder, go to the next line, pause and then go to the next. Shooting over across 4 Lanes of traffic is a good way to fail the test.

Pulling out onto a street with a high speed limit

Always give yourself plenty of time when pulling out onto a street with a high speed limit. It will not annoy the person providing your test if you wait there until it's safe. If you pull out in front of a car that is moving quickly and do not give yourself enough room you're going to lose points. Waiting until there's plenty of space, more so than you think you would need normally, it is the safe way to do it.

Fear to one side of the lane

Often beginner drivers tend of fear to one side of the lane or the other. On a single Lane road that means you might been too close to the double yellow or too close to the shoulder. To prevent that there is a technique that some people used that is helpful when you're learning , is to look farther ahead in the road and try to imagine the center of the road, picture a line in the center of the lane you're in passing through the center of your vehicle. This helps keep you in the center of your lane which is important for succeeding at the driver's test.

Tip for make a perfect stop

When you´re coming to a stop sign or an stop or red light is really important to stop before the white line in the road. That mean, when you're coming to a full stop, you should still be able to see the white line in front of the hood of your car. Then, if it's a blind turn, once you come to a full start, now you can start creeping out a little bit further and further so you can see the flow of traffic and make your right or left turn.

Always use a safe following distance between yourself and the car in front of you. The higher the speed limit is, the more the following distance between cars. That is because, if the person in front of you breaks all the sudden, you want to give yourself enough time to react.

Braking tips

Before you break, always check your mirrors. If you come onto a stop abruptly and there's a car right behind you, they could run into you. If it's an emergency situation this obviously isn't always possible, but in the ideal case always check your rearview mirror before braking.

Keep your eyes always in movement

Always keep your eyes constantly scanning the road for pedestrian, any obstacles or turns that are coming up. That means checking your mirrors constantly: Your rearview mirror, your side mirrors, looking over your shoulder. Being attentive and showing that you're paying attention is going to make a great impression to pass your road test.

Cut corners

When making protective left turns people often cut corners. Passing over a double yellow or a white line is a great way to fail your driver's test so make sure to take it wide enough, stay in the guidelines when you're making left turns and not cut any corners.

Be as smooth as possible

Be as smooth as possible. this means smooth steering inputs, smooth braking and smooth acceleration. Being jerky is not going to go well.

Dont be aggressive

Drive defensively not aggressively. This day is about proving that you are a safe driver.

Check the speed limit

Obviously don't speed. This is more difficult than it sounds. In general people are used to going 5 miles an hour over the speed limit or so when driving in a daily situation but for the test you cannot do that. Speed limit or below is required.

Also having a radar detector in your car for the test probably won't leave a very good first impression.

Pre-drive test checklist:

The DMV wants to check if you are proficient with all the controls on the inside the car before you start the driver test.

Here's a sample of the pre Drive checklist:

  • The DMV will tell you to turn the car on, but don't start it.
  • Turn the turn signal on to the left and then the right.
  • Turn the headlights on and off.
  • Turn the windshield wipers on and off.
  • Turn on the emergency flashers in the morning.
  • The examiner may ask you, if you come out in the morning and there's frost on your front window, how do you defrost your front window? You selected froster, turn the fan on and select the “Heat”.
  • Any other examiner will ask you to show them your defrosters: Where are they located?
  • The examiner will then ask you to disengage the emergency parking brake and then, engage the emergency parking brake.
  • They make ask you to honk the horn.

This website is privately owned and is not affiliated with any government agency. Remember that we are never going to solicit any personal information, ID or credentials. To find a list of official websites, please click here


Search DMV offices by service


© 2024 dmvnearme.net - This website is privately owned and is not affiliated with any government agency. Official DMV links